5th Wheel Lube Plates Cushions vibrations and helps protect your 5th Wheel against friction and wear. Constructed from high-density wear-resistant plastic. No drilling or tools required for installation.
FasTen Leveling Blocks The FasTen Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. They are also compatible with Camco’s Leveling Blocks. They have a strong, durable construction and are engineered with a patent-pending design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Comes in yellow or brown.
Big Bag Stabilization Kit The Camco Big Bag Stabilization Kit is a 14 piece kit that includes everything you need to stabilize your trailer set up, with a convenient storage duffle included. Each stabilization piece is made of durable, UV-stabilized resin and is easy to use. The kit includes 2 Tri-Levelers for customizable leveling, 2 Wheel Chocks to help keep your trailer in place, 4 Regular and 2 Large Stabilizing Jack Pads that help prevent jacks from sinking into soft ground, 2 Wheel Stops that secure tandem tires to prevent movement while parked or re-hitching and 1 Tongue Jack Stand to evenly distribute the weight of the tongue.
AccuPark Parking Mat Never worry about missing your mark again, even in the dark with Camco’s AccuPark Parking Mat. The AccuPark Parking Mat features two bumps: a smaller, warning bump to drive over and a larger one to stop at in order to ensure parking accuracy. The mat comes with durable adhesive tape that easily installs and stays in place. A reflective strip on the large bump increases visibility, even when you’re parking in the dark. Protect your car and the possessions in your garage with the AccuPark Parking Mat.
Eaz-Lift Tongue Jack Raise and lower your A-Frame trailer tongue with ease using the Eaz-Lift Power Jack. Used on a hard, level surface, the Eaz-Lift Power Jack safely raises and lowers your trailer tongue with just the press of a switch. The Power Jack utilizes a ball screw lifting mechanism which raises loads up to three times faster than conventional electric tongue jacks while using significantly less power. The Power Jack features an overriding clutch to protect against overloading, hardened steel gears and an aluminum gear box. Front entering manual drive handle provides clearance for tongue-mounted items such as propane tanks without interfering with jack operation. Equipped with an LED light and a sleek black design, the Eaz-Lift Power Jack is a useful and attractive addition to your trailer set-up. Lifting capacity 4,000 lb.
Tongue Jack Stand The Camco Jack Stand is a heavy duty, durable way to stabilize your tongue without the need for heavy cinderblocks or wood. The sturdy base has a weight capacity of 5,000 pounds, but is lightweight and easy to store. The recessed dock supports the weight of the tongue, preventing it from slipping and evenly distributing the weight, helping it to not sink into soft ground. Camco’s Jack Stand is made of UV stabilized resin for many years of use. The Jack Stand is not designed for use with a wheel-equipped tongue jack.
Eaz-Lift™ Trekker Eaz-Lift’s Trekker is the perfect combination of premium weight distribution and sway control in an easy to install hitch. Trekker utilizes Adaptive Sway Technology which goes above and beyond that of the competitors’ weight distribution hitches. When towing and challenged with wind gusts and passing trucks, the Trekker reacts and increases resistance as needed! During sharp turns and maneuvering, when sway control is unnecessary, the Trekker disengages sway control completely for improved handling. When towing in dangerous conditions, such as slippery or icy roads, sway control is unwanted. Trekker’s easy on/off sway control makes it a breeze to manually disengage. This feature also comes in handy when hooking-up and unhooking.
Recurve R3 Weight Distributing Hitch The ReCurve R3 is a weight distribution hitch that features adjustable sway control. By simply adjusting the clamp, you can decide how much sway control is exerted on the trailer. The ReCurve R3 will distribute the weight of your trailer evenly across the axles of the vehicle and provide as much sway control as you choose. Or, turn the sway control completely off in dangerous or icy road conditions. Its top-loading spring bars give it more ground clearance than other hitches, and the streamlined design makes the hitch and the trailer move as one, while creating a sleek look. Hitch ball included.
Recurve R6 Weight Distributing Hitch The ReCurve R6 is our most user friendly weight distribution hitch, and it features premium adaptive sway control. With other sway control hitches, turning can be an even bigger hassle than it usually is with a trailer because the sway control “locks” the trailer straight. With the ReCurve R6, the hitch will control your sway for normal driving, but when you turn, the sway control will automatically disengage, making maneuvering smoother and easier on the driver. The sway control can easily be turned completely off in dangerous or icy road conditions. Its top-loading spring bars give it more ground clearance than other weight distribution hitches, and the streamlined design makes the hitch and the trailer move as one, while creating a sleek and subtle look. Hitch ball included.
Adjustable Utility Ball Mounts Fits All 2" Square Receivers – Hitch ball not included (Powder coat baked-on finish)Ideal for those who have more than one trailer or tow vehicle. Grade 5 bolts supplied. Rated for trailer weights up to 5,000 lbs and tongue weights up to 500 lbs. Shank hole (1")for ball. Boxed with Hitch Pin & Clip; HITCH BALL NOT INCLUDED. 8-1/2" drop; 7-1/4" lift.
Bolt-Together Hi-Low Shanks Used in either the up or down position to match the ball mount to any coupler height. Fits 2" x 2" receiver. 2-1/2" Drop, 5-1/2" Rise. (part # 48120 is included in the 48000, 48001, 48003, 48051, 48052, 48053, 48054 and 48073 hitches.)
Extra Low Shank Ball Mount and Shank to be used in LOW position ONLY to match the ball mount to coupler height. Fits 2" x 2" receiver. 9-1/2" Drop.
Long Bolt-Together Hi-Low Shanks Used in either the up or down position to match the ball mount to any coupler height. Long hi-low shanks provide the extra length sometimes needed to obtain clearance from bumper interference. Fits 2" x 2" receiver. 5-3/4" Drop, 8-3/4" Rise.(Additional 3-1/4" Drop/Rise)
Reversible Ball Mounts Ball mounts are used to convert a receiver from a weight distributing to a weight carrying hitch by creating ball platform for attaching a hitch ball. The ball mounts or utility hitch bar length are determined by measuring from the center of the pull pin the to the center of the hitch ball hole. The drop or rise is determined by measuring from the top of the mount to the top of the tongue. All Ball mount shank holes are 1". (POWDER COAT BAKED ON FINISH) Fits 2" X 2" Receiver, Rated MGTWR/MTW 6000/600. Ball Mounts are available boxed or unboxed.(Additional charge for boxed ball mounts.) Hitch Ball not included. All Ball Mounts are unboxed in Canada.
Straight Ball Mount Ball mounts are used to convert a receiver from a weight distributing to a weight carrying hitch by creating a ball platform for attaching a hitch ball. The ball mounts or utility hitch bar length are determined by measuring from the center of the pull pin the to the center of the hitch ball hole. Shank holes are 3/4". (POWDER COAT BAKED ON FINISH) Fits 2" X 2" Receiver, Rated MGTWR/MTW 3500/350. Ball Mounts are available boxed or unboxed. Be sure to choose the correct part number below. (Additional charge for boxed ball mounts.) Hitch Ball not included. Ball Mounts are unboxed in Canada.
Gooseneck Adapter Eaz-Lift's Gooseneck adapter will convert most standard fifth-wheel trailers to a gooseneck trailer. This allows you to have the convenience of towing two types of trailers with only one truck. You will also enjoy towing a fifth-wheel trailer without having a large hitch taking up the bed of your truck. Eaz-Lift's Gooseneck adapter features an automatic latching coupler for a simple hookup and disconnect. It has a 30,000 lb tow rating and is available in 12, 15 and 17 inch heights for your specific truck and trailer setup. Easy to install and comes with all of the parts and hardware needed for installation.
Gooseneck Ball & Plate Eaz-Lift's Gooseneck adapter will convert most standard fifth-wheel trailers to a gooseneck trailer. This allows you to have the convenience of towing two types of trailers with only one truck. You will also enjoy towing a fifth-wheel trailer without having a large hitch taking up the bed of your truck. Eaz-Lift's Gooseneck adapter features an automatic latching coupler for a simple hookup and disconnect. It has a 30,000 lb tow rating and is available in both 15 and 12 inch heights for your specific truck and trailer setup. Easy to install and comes with all of the parts and hardware needed for installation.
Chain Loop Safety chain for use with fabricated receiver and hitches. Small Loops Class I and II Large Loops for Class III and IV.
Combo Bar 2" x 2" x 1/4" wall with collared tube, used to create under-car receivers for vehicles where standard or frame hitches are not available. Can be bolted or welded to vehicles undercarriage. Sized and punched to fit all common weight distributing hitch ball mounts or utility ball mounts. (*48173-48175: Wt. Dist. only with 24" to 48" combo bar when properly installed.)
Tow Bar and Tow Bar Parts Rated at 5,000 lbs GVW for towing pick-ups, cars and multi-purpose vehicles. Designed for universal fit, with adjustable arms that extend from 26" to 41". Includes all zinc-plated hardware. The quick disconnect pull pins allow easy removal and the collapsing side arms afford trunk storage. This product is fully tested to SAE and V-5 criteria. A 2" ball is required. Safety chain loops are electrically welded to side arms for easy chain attachment. Tow Bar is to be installed by a professional installer/fabricator experienced in selecting vehicle attachment areas with adequate strength. SOME VEHICLES REQUIRE CUSTOM BASE PLATES. The Tow Bar is boxed, completely assembled. UPS shippable at 31 lbs.
Bent Bar Weight Distributing Hitches Over five decades ago, Eaz-Lift became the first patented weight distributing system in North America. Designed with fewer parts, machine tapered round spring steel bars, and forged longer for a smoother ride with interchangeable bars that have positive latching action for operation. Eaz-lift has a broad selection of weight distributing hitches that include bolt-together ball mounts that are completely adjustable for changing ball heights with right and left hand sway control mounts. All necessary parts come with each hitch including hook-up brackets, spring bars, chains, ball mount, shank and hitch pin, clip and bolt package for adjustable hitches. Ball is NOT included. With or without bolt together adjustable shank.
Sway Control Adapter For 2" ball mounts—fits most competitors' brands of ball mounts with 1" ball shank hole. Bolts together for use on left or right side. Powder coat baked on finish. Does not include balls or utility ball mounts.
Sway Control Adapter - Clamp-on Bolts together—eliminates welding and prevents damage during installation to wiring enclosed in framework. For use with 2 x 3 inch "A-frame" trailers. Works on right or left side. Not for use on trailers with surge brakes.
Sway Controls Minimizes sway caused by passing trucks and sudden wind gusts. Double friction disc brake principle provides constant sway abatement. Attaches with easy socket and spring connectors; removes for easy storage. Zinc-plated slide bar for smooth, consistent action. Not for use on trailers with surge brakes. Trailers over 25 feet may requires two sway controls.
Eaz-Lift's 18K and 18KS Fifth Wheel Hitches Eaz-Lift quality on a standard base-rail-style bracket system. The 18K-stationary- and 18KS-slider Fifth Wheel Hitches' universal design allows them to be mounted to any existing base rails or Eaz-Lifts's heavy duty rails. Ideal for a truck with a short bed, the 18KS utilizes the slider system to avoid truck and trailer damage by allowing additional turning clearance.
Free Ride™ Fifth Wheel Hitch The Fifth Wheel hitch that's there when you need it, not when you don't. Your truck bed is more than just a place for your Fifth Wheel hitch. That's why when you're not towing, the Free Ride removes completely, leaving your bed flat and clear.
Rail Rider™ Hitch Only Camco's Rail Rider™ slider fits both fifth wheel and gooseneck trailers and leaves no rails behind. Compact, lightweight and durable Rail Rider is easy to install with no drilling into your truck frame. And it's easy to remove, leaving your truck bed completely free and clear. With Rail Rider's locking pin technology, backing your short bed truck has never been easier.
Utility Trailer Levels Mount with screws or self-adhesive tape. Graduated markings help you to determine how much to adjust your vehicle. Patented.
AccuPark Parking made easy! Park your vehicle in the same place every time with AccuPark. Great for cars, trucks, RVs and trailers. Adhesive tape strips included.
Cross-Frame Stabilizing Jacks Cross-frame assembly allows for greater stability. Electronic deposition coated for maximum rust protection. Adjustable for most cross-frame applications (64" to 74"). Easy-to-follow instructions included. Has a 2000lb stabalization rating.
Stabilizing Base Pads For use with most cross-frame or “T” type stabilizing jacks. Wide pad construction for greater stability. Installation hardware and anti-rattle rubber grommet included. Four pads per box.
Adjustable Sway Bar Control Diminishes sway from windy conditions or passing vehicles. Provides constant and adjustable sway reduction. Features dual brake pad system. Comes complete with slide bar, crank handle, spring clips, friction plate, ball tongue plate, ball tongue plate support and chrome tongue ball. Detaches quickly for storage.